1) What are the similarities and differences between labeling machines, steel sheet pasting machines, adhesive backing machines, and shielding cover pasting machines?
The principle is the same. The details are different. For example, applying back glue usually requires more precision in XYZ, and applying reinforcement requires heating and curing, so the operation methods are different.
2) The customer asked why the shielding cover is not used with the placement machine?
Because the shielding cover is usually relatively large, the vacuum system needs to be specially made, and because of the different shapes, the visual alignment algorithm for the placement machine is not suitable, and a more powerful method of visually establishing the template is needed.
3) What is the general labeling speed?
It varies depending on the label. The most normal range is 1.2s-1.5s, including material picking, alignment, and placement time. If you need higher speed, you need to customize it, such as combining multiple heads, multiple sets of vision, and multiple sets of feeders to reduce the time of picking and aligning.
4) Can tag detection and MES data upload be done?
Yes, it needs to be developed according to each company’s interface standards.
5) What is the adjustable adaptation range of the tag feeder?
It adapts to label widths of 0.5-60mm, and can also output multiple labels in one line at the same time. Other sizes are non-standard and can be customized
6) How many groups of feeders can be connected at most?
Generally, up to 4 groups can be connected. More than this requires customization
7) What is the feeding method for shielding cover?
It can support roll material, Tray material, or tube material. It can be matched with different Feeders.
